|THP2WD01||Construction and Optimization of Cryogenic Undulators at SOLEIL||193|
Funding: Synchrotron SOLEIL, L'Orme des Merisiers, 91 192 BP 34 Gif-sur-Yvette, France,
With permanent magnets undulator operation at cryogenic temperature, the magnetic field and the coercivity can be enhanced, enabling shorter periods with high magnetic fields. The first full scale (2 m long, 18 mm period) hybrid cryogenic undulator  using PrFeB  magnets operating at 77 K was installed at SOLEIL in 2011. Photon spectra measurements, in good agreement with the ex-pectations from magnetic measurements, were used for precise alignment and taper optimization. The second and third 18 mm PrFeB cryogenic undulators, modified to a half-pole/magnet/half-pole structure, were optimized without any magnet or pole shimming after assembly but mechanical sortings and some geometrical corrections had been done before assembly. A systematic error on individual magnets on the third U18 was also compensated. In-situ measurement benches, including a Hall probe and a stretched wire to optimize the undulator field at room and cryogenic temperature are presented. An upgrade of these in-situ benches will be detailed with the fabrication of a 15 mm 3 m long PrFeB cryogenic undulator at SOLEIL.
 C. Benabderrahmane, M. Valléau, M. E. Couprie, Phys. Rev. Accel. Beams 20, 033201(2017)
 C. Benabderrahmane, M. Valléau, M. E. Couprie, NIMA 669, 1-6, (2012)
|DOI •||reference for this paper ※ https://doi.org/10.18429/JACoW-FLS2018-THP2WD01|
|Export •||reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)|